Edge Integrated

Scope of Work – Tile, Marble & Stone Installation

1. Site inspection and verification of the areas to be tiled or stone-finished.
2. Measurement of the required areas and confirmation of material quantities.
3. Preparation and cleaning of the existing surface before installation.
4. Leveling and preparation of the substrate to ensure a smooth and even finish.
5. Supply and application of suitable tile/stone adhesive or cement-based mortar.
6. Cutting and shaping of tiles, marble, or stone pieces as required for proper fitting.
7. Installation and alignment of tiles/marble/stone according to the approved layout and pattern.
8. Maintain consistent joints and spacing using appropriate spacers.
9. Installation around corners, edges, columns, door frames, drains, and other service openings.
10. Grouting of joints using suitable grout material after completion of installation.
11. Application of silicone/sealant at required movement joints, corners, and interfaces.
12. Cleaning and removal of excess adhesive, grout, and construction residue from the finished surface.
13. Final inspection to check alignment, level, joint consistency, and overall workmanship.
14. Handover of the completed area in clean and ready-to-use condition.